So you’ve just purchased a new tree, shrub, or maybe even both – what do you do now? Planting a container grown plant takes careful steps to ensure that the plant thrives once it’s finally in the ground, but we are here to walk you through every step. We also offer plant delivery and installation, so if you need help, reach out and we can get you on our schedule!
Getting Started
Plants grown in pots are easier to plant and survive better than field-dug, or “balled and burlapped” plants. Container grown plants can be transplanted any month of the year, since they have less root damage (stress) than dug plants. However, watering consistently the first growing season is critical for survival.
Proper Watering & Planting = Survival
Proper Soil Amendments = Healthier Growth
Happy Frog Soil Conditioner
by FoxFarm!
Our favorite amendment for improving clay soil.
With Earthworm castings, fine bark, Humic acid, and living soil microbes.1.5 cu. ft. bag
Planting Directions
1. When digging the hole, don’t go too deep.
Dig the hole at least twice as wide, but no deeper than the size of the root ball. Amend the removed soil with one part Happy Frog Soil Conditioner to two parts existing soil. Adding some Bio-Tone Starter Plus fertilizer to the backfill will give even better results.
2. Loosen the outer layer of the “root ball”
before placing it in the hole. On trees, it may be necessary to scratch the top layer of soil to find the “root flare,” the point where the trunk meets the roots.
3. Adjust the depth of the hole
so that the “root ball” (or root flare for trees) is slightly higher than the original soil level! Place the plant in the hole and adjust to the proper level.
4. Fill in the sides of the planting hole
with the amended soil, but DO NOT add any soil on top of the roots.
5. Add about 2 inches of mulch
around the root area, but NOT touching the trunk. Mulch helps hold in moisture, buffer the soil temperature, and suppress weed growth.
6. Water immediately and consistently!
New plantings need consistent watering during the first year. When watering your newly planted/installed plants, slowly trickle enough water to saturate the original root ball directly at the trunk throughout the first year, especially during the summer months. During your first watering, if the soil settles excessively, add some additional soil to equalize the soil level as shown in the diagram. Monitor your watering closely as well as the temperatures and rainfall. Brief, light rainfall or rotating irrigation sprinklers do not always provide enough saturation. Generally, late fall and winter plantings may need less watering depending on the rainfall and temperatures.
Warm Season Plantings
For the first few weeks, water every 1 to 2 days. Then water every 2 to 3 days till the end of the first summer and fall, and adjust according to rainfall and outdoor temperatures.
Cool Season Plantings
Water every 1 to 3 days until the end of the first summer and fall, and adjust according to rainfall and outdoor temperatures.
We recommend applying Bio-Tone Starter Plus microbial plant food to all new plantings for improved root development.
Additional Planting Tips
Locate utility lines before planting!
Call “PUPS” “811” or 1-800-922-0983 or visit www.sc811.com to have all utility lines marked for free within 3 business days.
Staking Trees
Staking may be needed the first growing season to prevent shifting or falling over in severe storms. South Pleasantburg Nursery has stake kits available, or “homemade” kits can be used. Be sure to avoid “girdling” the trunk with tightly tied cables. The cables anchoring the tree should allow for some “slight” movement, about two inches, of the tree in windy conditions.
Fertilize
Fertilize with Bio-Tone Starter Plus at planting, then fertilize every spring and fall with Plant-Tone (or Holly Tone for acid-loving plants). These are balanced, organic products that will not only nourish the plants, but improve the soil as well.
Maintain Mulch!
Maintain a 2 to 3 inch layer of mulch around all plantings, but NOT right up against the trunk of the plant. Pine needles or bark mulches are both fine, but avoid “wood chips” from newly shredded trees or stumps.
Have questions? Contact us and we can help you out!


